The American Standard GREEN TEA T010.730 is a programmable thermostat designed for efficient HVAC control, featuring a user-friendly interface, multiple programming schedules, temperature hold functions, system status indicators, and compatibility with common heating and cooling systems. It includes a backlit display, intuitive menu navigation, and energy-saving modes. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Backlit LCD display, Control Buttons, Menu Navigation, System Status LEDs, Battery compartment, Wiring terminals.
| Feature | Description |
|---|---|
| Backlit Display | Easy-to-read screen in low light conditions |
| Programmable Schedules | 7-day programming with 4 periods per day |
| Temperature Hold | Temporary or permanent override of programmed schedule |
| System Status Indicators | LEDs for Heating, Cooling, and Fan operation |
| Battery Backup | Maintains settings during power outages |
| Energy Saving Mode | Optimizes HVAC operation for reduced energy consumption |
| Menu Navigation | Intuitive button interface for easy programming |
| Filter Change Reminder | Alerts when HVAC filter needs replacement |
| System Switch | Selects Heat, Cool, Auto, or Off modes |
| Fan Control | Manual or automatic fan operation |
Turn off power to HVAC system before installation. Remove old thermostat and prepare wall plate.
WARNING! Electrical shock hazard. Always turn off power at circuit breaker before installation. If unsure, consult a qualified HVAC technician.
Power on thermostat; follow initial setup prompts.
CAUTION! Ensure proper wire connections before restoring power. Incorrect wiring can damage equipment.
Access menu via MENU button. Front Panel: UP/DOWN arrows, MENU, HOLD, FAN, SYSTEM.
Display Indicators: Heating/Cooling icons, Fan status, Hold indicator, Battery low warning.
Temperature Adjustment: Use UP/DOWN arrows to set desired temperature. System Mode: SYSTEM button cycles through Heat, Cool, Auto, Off. Fan Control: FAN button selects Auto or On. Hold Function: HOLD button activates temporary or permanent override. Programming: MENU > Schedule to set time/temperature programs. Settings: MENU > Settings for clock, format, system configuration, filter reminder.
Standard wiring for conventional systems: R (24V power), W (Heat), Y (Cool), G (Fan), C (Common).
Tip: Take photo of old thermostat wiring before removal for reference.
Create custom temperature schedules for energy savings.
WARNING! Do not set temperatures too extreme; allow system to maintain comfortable range.
Energy Saving Mode: Reduces energy consumption by optimizing temperature setbacks. Filter Change Reminder: Program interval (30-90 days) to maintain system efficiency. Temperature Limits: Set minimum and maximum temperature boundaries.
Turn off power before cleaning. Use soft, dry cloth only; do not use liquids or abrasive cleaners.
CAUTION! Do not spray cleaning solutions directly on thermostat. Keep away from moisture and extreme temperatures.
FCC Part 15: Class B digital device; complies with interference limits for residential use. UL Listed: Meets safety standards. Copyright © American Standard; trademarks of American Standard Companies. For support, visit www.americanstandard.com or contact 1-800-843-0304.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Blank display | Power loss/batteries | Check circuit breaker; replace batteries; verify 24VAC at R and C terminals. |
| System not responding | Incorrect wiring/mode | Verify wiring connections; ensure SYSTEM mode is set correctly (Heat/Cool). |
| Temperature inaccurate | Location/calibration | Relocate away from heat sources; check calibration in settings menu. |
| Short cycling | Settings/equipment | Adjust temperature differential; check HVAC equipment for issues. |
| Fan won't turn off | Fan setting/wiring | Set FAN to Auto; check G terminal connection. |
Reset: Remove batteries, turn off power for 30 seconds, then restore.
Service: 1-800-843-0304; www.americanstandard.com